• 스마트하고. 검증되었으며.
    호환되는.

    원숙한 기술에 의한 강력한 성능.

단순한 조작으로 최적의 프로세스 실현.

S!MPATI® – 시스템의 효율성을 높이십시오!

새로운 디자인과 실용적인 메뉴 가이드, 그리고 기준이 높은 성능 평가로 weisstechnik 사는 새로운 버전의 검증된 제어 소프트웨어를 소개합니다. S!MPATI®은 조작 효율성과 성능을 제공할 뿐만 아니라, S!MPATI®를 이용하여 여러분의 시험 프로세스에 대한 이상적인 솔루션인 시험 보고서의 자동 생성을 위한 플랫폼 기반의 확장을 온라인으로도 제공합니다! S!MPATI® 은 Windows 10과 완벽하게 호환되므로 미래에 완벽히 대응합니다. 이는 무엇보다도 2020년 초부터 보안 업데이터가 더 이상 제공되지 않는 Windows 7을 아직 사용하고 있는 실험실에 중요합니다. S!MPATI®는 weisstechnik 사의 모든 최신 장비에 적합하며 1987년까지 생산된 거의 모든 모델에 대해 하위 호환이 가능합니다. 그 외에도 타사의 시스템에도 통합될 수 있습니다.

 

저희 제품의 특장점:

  • 여러분의 평가 데이터에 빠른 액세스
  • 여러분의 시험 시스템에 대한 간단한 원격 제어 및 원격 모니터링
  • 단순화되고 최적화된 사용자 가이드
  • 1987년까지의 하위 호환 가능
     

Windows 7:

  • 2020년 1월 지원 종료

새로운 메뉴 가이드.

직관적인 메뉴 가이드가 있는, 명확하게 체계화된 S!MPATI® 메뉴를 통해 중요한 모든 기능을 빠르고 단순하게 이용하십시오. 그 외에도 최적의 상태로 취급할 수 있도록 실험실의 평면도를 업로드하고 모든 시험 시스템의 배치를 시각화할 수 있습니다. 이렇게 모든 시험 캐비닛을 하나의 컴퓨터에서 제어하고 프로그래밍하며 그 데이터를 평가할 수 있습니다. 이렇게 함으로써 시스템의 효율성이 효과적으로 향상되는 동시에 고장을 방지합니다.

  • 단순한 조작 가이드
  • 건물 배치도를 통한 시작화
  • 실험실의 중앙집중식 제어, 프로그래밍 및 평가

여러분의 다기능 평가.

S!MPATI®은 시험 결과를 표시하고 편집하며 평가하는 방법을 여러분에게 거의 무한하게 제공합니다. 이처럼 특히 그래프를 축소/확대하고 조절할 때 상당히 단순화된 직관적인 사용자 가이드가 주는 이점이나 CSV 및 이미지 파일을 내보내기할 때 최적화된 기능이 주는 이점을 누리게 됩니다. weisstechnik 사가 고객과 협의하여 자체적으로 개발한 소프트웨어의 성능은 데이터 항목이 최대 1천만 개인 방대한 테스트로 증명되었습니다. 모듈 S!MPATI® 타임 랩스와 호환되므로 카메라 영상을 그래프 평가 내에 간단하고 빠르게 통합할 수 있습니다.

  • 강력한 소프트웨어 성능
  • 사용자에 맞추어 조절할 수 있는 표시
  • 다양한 확대/축소, 측정 및 평가 기능
  • S!MPATI® 타입 랩스를 이용한 카메라 영상의 시각적 평가

자동 경고 알림 시스템.

시뮬레이션 시스템에 오류와 경고, 그리고 중요한 알림이 표시될 때는 항상 이러한 표시가 S!MPATI®에서 한눈에 볼 수 있도록 열거됩니다. 해당 보고서를 검색하고 분류할 수 있으며 이 보고서를 PDF 파일로 내보내 나중에 시험 문서를 작성할 수 있습니다. 그 외에도 자동으로 발생되는 이메일이나, 각 메일 서비스에 따라 SMS 경고가 시험 과정을 안전하게 보호하고 중단을 방지합니다.

  • 시스템 보고서 및 시스템 상태에 대한 개괄적인 열거
  • 자동으로 생성된 이메일 경고
  • 포괄적이고 개별적으로 조정할 수 있는 경고 및 메일링 목록

S!MPATI®

스마트하고. 검증되었으며. 호환되는.
원숙한 기술에 의한 강력한 성능.

Download PDF

S!MPATI® 온라인으로 세계에 액세스.

S!MPATI® 온라인은 소프트웨어의 기능이 확장되어 시험 보고서 및 시험 대상 관리 기능이 포함되어 있으며, 이 소프트웨어를 이용하여 어느 지역에서든 시스템에 액세스할 수 있고 시험 보고서도 자동으로 생성할 수 있습니다. 이 보고서는 DIN EN 60068-2-38에 의거한 Word 형식으로 전환되므로 손쉽게 편집될 수 있습니다. 이때 생성된 시험 보고서에는 필요한 모든 그래프 평가, 서면 시험 문서, 시험 대상 영상 및 그에 속하는 시스템 프로토콜이 포함되어 있습니다. S!MPATI® 온라인은 마이크로소프트 애저를 이용하여 안전한 클라우드 서비스를 제공하고 자동화된 업데이트 덕분에 사용자는 항상 최신 버전을 유지하게 됩니다. 그 외에도 S!MPATI® 온라인은 1999년 이후에 생산된 weisstechnik 사의 시험 캐비닛과 하위 호환됩니다.

  • 장소와 무관하게 원격으로 모든 시스템과 시험에 액세스
  • 시험 보고서의 자동 생성
  • 시험 대상의 관리
  • 새 라이선스 모델에 무료로 포함됨

S!MPATI® online - cloud-based test management

The solution for test reporting, specimen management and cross-location access to your systems with automated generation of test reports.

View now

S!MPATI® - The new multifunctional evaluation

Benefit from the new improved graphic evaluation. Simplified menu navigation, optimized zooming, integrated measurement functions and extensive export options are just a few of your advantages.

View now

Software-Downloads

Here you will find all information and downloads about our software.

9 온라인 파일

 -

S!MPATI® 4.70.1 – full version and update (A S!MPATI® 4.70 license must be purchased)

S!MPATI® enables the simple monitoring of test systems as well as the evaluation and...

다운로드

S!MPATI® 4.70.1 – full version and update (A S!MPATI® 4.70 license must be purchased)

Version

4.70.1

날짜

File size

157.24 MB

Description

S!MPATI® 4.70.1 – full version and update - (A S!MPATI® 4.70 license must be purchased for use)

Note: The installation package can be used as an update for version 4.70 and for a new installations.

S!MPATI® enables the simple monitoring of test systems as well as the evaluation and documentation of their test sequences. The operation of the test systems is simple and time-saving. With integrated monitoring routines, the operation of the systems becomes more reliable.

With S!MPATI® up to 99 test systems can be networked, controlled and monitored.

  • Fast access to your evaluation data
  • Easy remote control and monitoring of your test systems
  • Simplified and optimized user guidance with S!MPATI® 4.70
  • Backward compatible with controller types up to 1987
  • Windows 10 compatible

A S!MPATI® 4.70 license must be purchased for use.

S!MPATI® 4.70 can also be extended with the following modules:

  • S!MPATI® Online: S!MPATI® online extends your software functions by test reporting as well as test specimen management and enables you to access your systems across locations with automated generation of test reports. To use it, S!MPATI® must be installed; the module itself is a free component within a Simpati maintenance contract.
  • S!MPATI® time labs 4.70: S!MPATI® time labs enables the simultaneous recording of measurement data and images from cameras and the displaying with the evaluation software included in S!MPATI®. To use it, S!MPATI® must be installed and an extra license must be purchased.
  • Simpati Service 4.70: By installing the "Simpati Service" service module, all S!MPATI® system processes in Windows are executed as a background service and automatically started after a restart of the operating system. This allows Simpati to run even if the Windows user is logged off. For use S!MPATI® must be installed, the module itself is free of charge.

Release Notes

Compatible products
TimeLabs 4.70 (2.3.0.0 and higher)
SimpatiService 4.70 (3.1.2.0 and higher)

Installation/ Uninstallation Simpati 4.70.1

The installation routine has been further optimised with release 4.70.1.

  • The installation package can be used both as an update for version 4.70 and for a new installation.
  • When installing as an update, Simpati does not have to be registered again.
  • When uninstalling, the Simpati registration file is not removed
  • In the case of a new installation, the file Simpati.str automatically contains entries for Klima2000 units

User administration
The user administration has been extended to allow a connection to the Weiss OPC/UA solution.

Status menu
It is now possible to set limit values for data loggers via the status user interface.

List of bugs fixed/corrected with this version

  • If time corrections are made to the past (e.g. by an NTP server), the current archiving process stops)
  • Under certain conditions the main menu is only opened minimally in the Windows task bar
  • In case of a longer interruption of the data transmission, the SimViewer will not display the missing data as gaps in the recording
  • Measuring tape correction only works after switching the view
  • When zooming, SimViewer displays incorrect values in the measuring tape
  • During time changes, the recorded data is not displayed correctly in the order of occurrence
  • Data recording deviation after 4 days > 1 second
  • Values of profiles with ID 1000 are not displayed correctly
  • SimServ crashes due to missing performance counter
  • Wrong spelling in Simserv command line help
  • Chamber names cannot be read from the controller
  • For very long profile names, the conversion of text programs into the symbolic format fails

Known Issues and Limitations

  • Day/night programs created in WebSeason are not supported by Simpati and therefore cannot be transferred from the device to Simpati.
  • Title of the main menu is not unicode compatible: For example, Chinese characters become question marks ("?")
  • Missing umlauts in pdf/a export: When exporting from the report the umlauts "disappear" from the text. This can lead to misunderstandings (e.g. with umlauts in names or similar).
  • Program transfer: In the message window for the confirmation of the programme transfer the programme name is missing
  • Missing report entry when manually locking/unlocking an installation:
  • Archiving: A change of the archiving interval via the SimArchiveDialog is overwritten when restarting Simpati.
    Remedy: Change the archiving interval via the chamber configuration.
  • SimViewer display of the month: SimViewer currently displays months always with 30 days.
  • SimViewer: CSV-Export: All available profiles are exported, despite other selection
  • SimViewer: When switching to the past while recording is running, the data is not updated as long as the time entries are in the past
  • SimViewer: Picture display - if the time to be displayed is not selected with the slider but with arrow keys or keyboard, the picture is not updated
  • When opening the evaluation via the main menu, the user rights are not checked
  • Warning limits deactivated in the PLC cannot be activated via Simpati
  • Missing simpati.sys- file leads to a Simconfig error when starting Simpati Remedy: Start SimConfig.exe from the Windows start directory
  • The "Delete User" button can also be selected for the system user "Admin", but the user is correctly not deleted.
  • If the symbolic editor is open when closing Simpati, it will not be closed automatically.

Status October 2020

System requirements

Computer system IBM-compatible PC
(Intel i5, 2.2 GHz or equivalent)
Operating memory > 8 GB
Available hard drive capacity for S!MPATI® 1 GB
Supported interfaces RS 232, RS422, RS 485, IEEE 488.2 with external converter, Ethernet TCP/IP
Printer All printers supported by the operating system
Operating system (64-bit) Windows 10
Windows 8 or 8.1
Windows Server 2012
Windows Server 2016
Port enables (firewall) required See the following firewall settings
Software .NET Framework 3.5 and 4.72
Internet information service (IIS) 7.5 or higher for the S!MPATI® Web application.
The default IIS server configuration is assumed. If further security settings are configured on the server, then the web application may need to be configured correspondingly.

 

Firewall settings

Port Application Function Direction TCP UDP
21 S!MPATI® For transferring programs using SimC3K (Simpac or higher). S!MPATI®->test system x -
22 S!MPATI® For transferring programs using SFTP/SSH (new Simpacs with secure function, S!MPATI® v4.70 or higher). S!MPATI®->test system x -
25 S!MPATI® SimMailer For standard email dispatch from S!MPATI® (port-dependent from mail server). S!MPATI®->Mail Server   -
80 S!MPATI® TimeLabs For accessing the webcams. S!MPATI®->Webcam x -
80 S!MPATI® Web For web access. Client->S!MPATI® Server x -
80 Webseason/SimpacWeb For web access to Simpac. Client->test system x -
443 Weiss platform agent Communication with platform for S!MPATI® installations with Internet access. S!MPATI®->Internet x -
443 S!MPATI® TimeLabs For SSL access to the webcams. S!MPATI®->Webcam x -
443 Webseason/Https For access to Webseason. Client->test system x -
465
587
S!MPATI® SimMailer For SSL/TLS email dispatch from S!MPATI® (port-dependent from mail server). S!MPATI®->Mail Server x -
1900 S!MPATI® For the Device Finder and Maintenance. S!MPATI®->Network (broadcast) - x
2048 S!MPATI® For the SimC3K driver (to run test systems with Simpac controller). S!MPATI®->test system x -
2049 S!MPATI® For S!MPATI® setup (Simserv / S!MPATI® Plus) to configure test systems with Simpac controller. S!MPATI®->test system x -
5120 S!MPATI® TimeLabs For accessing the webcams that are a component part of the controller. S!MPATI®->test system x -
5671 Agent Weissplatform Communication with platform for S!MPATI® installations with Internet access. S!MPATI®->Internet x -
7777 S!MPATI® JBUS over TCP (for SimConNet test systems, 2006 or earlier). S!MPATI®->test system x -
7777 S!MPATI® SimServ under S!MPATI® (for SimServ customer applications). Client->S!MPATI® x -
7778 Customer application For SimServ customer applications (SimConNet). Client->test system x -
7779 Customer application For SimServ customer applications (SimConNet). Client->test system x -
8443 Controller For using the lab computer to update the test systems later. Client->test system   -
8888 S!MPATI® For encrypted SimServs protocol. Client->test system x -

License terms

1. Scope of application
The companies named above (hereinafter referred to as “WEISS”) supply computer programs in electronic form such as Simpati and PLC control and visualisation programs (hereinafter Software) to customers (licensees).

The terms and conditions indicated in the following apply exclusively to the granting of usage rights to Software by WEISS. Other general business terms and conditions of the customer shall not apply, unless expressly approved by WEISS (in writing as a minimum requirement).

2. Deliveries and services of WEISS
The scope of delivery is specified in detail by the current product description including additional information in the application documentation. WEISS supplies the Software in the version that is valid at the time of supply or provision. The scope of delivery does not include installation, instruction or training services. The Software is supplied on a data storage device or can be downloaded from a WEISS website at WEISS’ discretion. The customer receives rights to the object code of the Software exclusively. It shall not have the right to use or transfer the source code.

Services relating to the support and maintenance of the Software shall be provided by WEISS exclusively on the basis of a separate written agreement.

3. Granting of usage rights
WEISS grants the customer - subject to a divergent individual, written contractual agreement - and subject to the condition precedent of complete and timely payment of the agreed remuneration, the non-exclusive, permanent, irrevocable and irredeemable right to use the software, i.e. in particular to store or load it permanently or temporarily, display or execute it.

Unless expressly agreed otherwise, the usage rights shall be granted exclusively for the country in which the customer has its headquarters. If the customer's headquarters are within the European Union, usage rights shall apply across the EU. The customer may use the software only for the contractually stipulated purpose. Commercial sub-leasing is prohibited. Duplication of the software is permitted only to the extent necessary for use as contractually agreed. The customer may produce backup copies of the software in accordance with its codes of practice to the extent necessary. Backup copies on mobile data storage devices must be identified as such with the copyright notice of the original data storage device applied.

Should the customer transfer its usage rights to a third party, it must impose on this party its duties and obligations from these terms and conditions with respect to the content and scope of the usage rights. Transferring to a third party shall remove the customer’s entitlement to use the Software. It must delete any copies it holds of the Software, provided such are not copies produced for backing up in accordance with the terms and conditions.

The customer undertakes not to convert the software to an alternative code form or to make any changes, extensions or otherwise edit the software, except as permissible in accordance with statutory provisions.

Where WEISS provides to the customer extensions to (e.g. patches, extensions to user manual) or new editions of the software (e.g. updates, upgrades) replacing software provided previously (“outdated software”), such are subject to these terms and conditions. Where WEISS provides a new edition of the software, the entitlement of the customer to use the outdated software shall cease, including without the explicit request by WEISS to return the software, once it begins using the new edition in a productive capacity. WEISS, however, shall grant the customer a three-month transition phase in which it may continue using both versions side-by-side. Duplication or alteration of the application documentation is not permissible, subject to the above provisions.

In the case of software products of third party manufacturers sold by WEISS or third party software components implemented by WEISS, the terms and conditions of use of the respective third party manufacturer shall apply to these software packages/components in the first instance.

4. Duty of cooperation of the customer
The customer shall take reasonable precautions to safeguard against software supplied by WEISS failing to operate properly, either partially or entirely. It shall be required to test the Software thoroughly to ensure the absence of defects, its usability for the purpose it intends and in the hardware and software environment provided by it, before putting into operational use. This also applies to software that it receives from WEISS in connection with the provision of maintenance or based on warranty. The customer shall be solely responsible for ensuring the presence or establishment of a serviceable, adequately dimensioned hardware and software environment.

Furthermore, it shall ensure that its data is backed up using the latest systems. It shall ensure that any up-to-date data stored in machine-readable format is reproducible with reasonable effort. The customer shall maintain an IT security concept using the latest available systems, to consist of technical and organisational measures. This shall include in particular appropriate measures to prevent unauthorised third party access to the Software.

The customer must immediately report to WEISS any defects detected. Notifications of defects must include information on the nature of the fault, in the case of software the module in which the fault occurred, and the operations undertaken when the fault occurred. A prerequisite for supplementary performance in accordance with Section 5 is the reproducibility or detectability of the reported defect.

5. Material defects and defects of title
WEISS provides the customer with deliveries and services free of material defects and defects of title. The customer is aware that minor software bugs that do not restrict the usability of the software or which limit its use only to a negligible degree cannot be fully eliminated in software products. Bugs of this nature do not constitute software defects in terms of the warranty. In the case of software, moreover, functional impairments resulting from the hardware and software environment provided by the customer, incorrect operation, defective external data, malfunctions of computer networks or other causes originating from the area of risk of the customer are not considered defects.

WEISS shall not be responsible for software modified unlawfully by the customer, unless the customer can prove that the modification is not the cause of the reported fault. If products or services provided by WEISS are faulty and a corresponding complaint has been made in writing and in good time by the customer, WEISS shall provide replacements or rectify any issues at its discretion. WEISS is to be given the chance to do so within a reasonable time frame of at least 14 working days. In the case of software, rectification in particular may take the course of providing a new program version, or WEISS indicating reasonable methods to circumvent the effects of the fault. The customer must accept the provision of a new program version including if associated with acceptable outlay for adaptation.

Rectification in the case of defects of title occurs by WEISS providing the customer with the means to use the software legally. WEISS in this regard may replace the software product for one of equal value and which complies with contractual provisions, if acceptable to the customer. Should third parties claim against the customer on the basis of property rights, the customer must notify WEISS of this in writing immediately. WEISS shall at its discretion and in consultation with the customer defend against or settle such claims. The customer must not acknowledge third party claims or settle these amicably. WEISS shall defend against third party claims at its own expense and shall indemnify the customer against all necessary costs and losses associated with defending against such action, provided such is not due to conduct on the part of the customer in breach of the terms and conditions. If attempts at rectification fail, the customer shall be allowed to reduce the fee payable or withdraw from the contract. Withdrawal, however, is permissible only if the customer previously and explicitly threatens WEISS with this in writing with a suitable further deadline.

6. Compensation for damages
Unless otherwise stated in the following regulations, WEISS shall be liable in accordance with statutory provisions in the case of the breach of contractual and non-contractual obligations. WEISS shall be liable for compensation for damages - irrespective of the legal basis - in the context of fault liability in cases of intent and gross negligence. In the case of simple negligence, WEISS shall be liable in accordance with statutory provisions subject to a more moderate standard of liability (e.g. for diligence in own affairs) only

a) for losses resulting from loss of life, physical injury or damage to health,

b) for losses resulting from a significant breach of a material contractual obligation (an obligation the fulfilment of which is essential to the proper execution of the contract and which the contractual partner regularly expects and should expect to be complied with); in such cases, however, liability shall be limited to the compensation of predictable, typically occurring losses.

The liability limitations indicated above shall also apply to breaches of duty by or benefiting persons whose culpability WEISS is responsible for in accordance with statutory provisions. The limitations shall not apply if WEISS fraudulently conceals a defect or has assumed a quality guarantee, or to claims of the customer under the Product Liability Act [Produkthaftungsgesetz]. Statements on the properties of the Software are to be viewed as descriptive of performance and do not constitute a quality or durability guarantee as defined by Art. 443 of the German Civil Code [BGB - Bürgerliches Gesetzbuch].

In the case of data loss, WEISS shall be liable only for losses that would still have occurred had the customer properly backed up data (Section 4).

7. Liability of customer and extraordinary termination
The customer shall be liable to WEISS for all losses incurred by WEISS from the violation of copyright provisions in Section 3.

WEISS shall be entitled to revoke the usage rights granted to the customer if the customer repeatedly exceeds the usage rights granted under Section 3 despite a warning from WEISS or fails to take suitable IT security precautions using the latest systems as defined by Section 4. In this case, the customer shall be obligated to immediately cease use of the original software along with any copies and to destroy these. The customer must send a written confirmation of destruction to the address specified below.

8. Place of jurisdiction and choice of law
The law of the Federal Republic of Germany to the exclusion of the UN Convention on Contracts for the International Sale of Goods (CISG) applies to all legal relationships between WEISS and the customer based on these terms and conditions.

The parties are aware that the software may be subject to export and import restrictions. In particular, authorisation requirements may exist or usage of the software or associated technologies may be subject to restrictions outside of Germany. The customer is required to adhere to applicable export and import control provisions of the Federal Republic of Germany, the European Union and the USA, and all other relevant regulations. Fulfilment of the contract by the Licensor is subject to the proviso that fulfilment is not impeded by national and international regulations of export and import law or by any other legal provisions.

If the customer is a merchant, public-law special fund or a legal entity under public law, the exclusive place of jurisdiction for all claims resulting from the aforementioned legal relationships shall be the registered office of WEISS; where legal action is taken by WEISS, the general place of jurisdiction of the customer shall also apply.

Languages

English, German, French, Korean, Chinese, Italian, Russian, Czech, Spanish

Download version
Description
Release Notes
System requirements
License terms
Languages

More Downloads:

S!MPATI® 4.70 - Installation Manual
 -

S!MPATI® 4.70.1 - Demo Version

The demo version gives you a first look into our S!MPATI® software environment.

다운로드

S!MPATI® 4.70.1 - Demo Version

Version

4.70.1 - Demo

날짜

File size

156.24 MB

Description

S!MPATI® 4.70.1 - Demo version

The demo version gives you a first look into our S!MPATI® software environment. Within the demo version you can extensively test the software with pre-configured demo systems.

S!MPATI® enables the simple monitoring of test systems as well as the evaluation and documentation of their test sequences. The operation of the test systems is simple and time-saving. With integrated monitoring routines, the operation of the systems becomes more reliable.

With S!MPATI® up to 99 test systems can be networked, controlled and monitored.

  • Fast access to your evaluation data
  • Easy remote control and monitoring of your test systems
  • Simplified and optimized user guidance with S!MPATI® 4.70
  • Backward compatible with controller types up to 1987
  • Windows 10 compatible

Release Notes

Compatible products
TimeLabs 4.70 (2.3.0.0 and higher)
SimpatiService 4.70 (3.1.2.0 and higher)

Installation/ Uninstallation Simpati 4.70.1

The installation routine has been further optimised with release 4.70.1.

  • The installation package can be used both as an update for version 4.70 and for a new installation.
  • When installing as an update, Simpati does not have to be registered again.
  • When uninstalling, the Simpati registration file is not removed
  • In the case of a new installation, the file Simpati.str automatically contains entries for Klima2000 units

User administration
The user administration has been extended to allow a connection to the Weiss OPC/UA solution.

Status menu
It is now possible to set limit values for data loggers via the status user interface.

List of bugs fixed/corrected with this version

  • If time corrections are made to the past (e.g. by an NTP server), the current archiving process stops)
  • Under certain conditions the main menu is only opened minimally in the Windows task bar
  • In case of a longer interruption of the data transmission, the SimViewer will not display the missing data as gaps in the recording
  • Measuring tape correction only works after switching the view
  • When zooming, SimViewer displays incorrect values in the measuring tape
  • During time changes, the recorded data is not displayed correctly in the order of occurrence
  • Data recording deviation after 4 days > 1 second
  • Values of profiles with ID 1000 are not displayed correctly
  • SimServ crashes due to missing performance counter
  • Wrong spelling in Simserv command line help
  • Chamber names cannot be read from the controller
  • For very long profile names, the conversion of text programs into the symbolic format fails

Known Issues and Limitations

  • Day/night programs created in WebSeason are not supported by Simpati and therefore cannot be transferred from the device to Simpati.
  • Title of the main menu is not unicode compatible: For example, Chinese characters become question marks ("?")
  • Missing umlauts in pdf/a export: When exporting from the report the umlauts "disappear" from the text. This can lead to misunderstandings (e.g. with umlauts in names or similar).
  • Program transfer: In the message window for the confirmation of the programme transfer the programme name is missing
  • Missing report entry when manually locking/unlocking an installation:
  • Archiving: A change of the archiving interval via the SimArchiveDialog is overwritten when restarting Simpati.
    Remedy: Change the archiving interval via the chamber configuration.
  • SimViewer display of the month: SimViewer currently displays months always with 30 days.
  • SimViewer: CSV-Export: All available profiles are exported, despite other selection
  • SimViewer: When switching to the past while recording is running, the data is not updated as long as the time entries are in the past
  • SimViewer: Picture display - if the time to be displayed is not selected with the slider but with arrow keys or keyboard, the picture is not updated
  • When opening the evaluation via the main menu, the user rights are not checked
  • Warning limits deactivated in the PLC cannot be activated via Simpati
  • Missing simpati.sys- file leads to a Simconfig error when starting Simpati Remedy: Start SimConfig.exe from the Windows start directory
  • The "Delete User" button can also be selected for the system user "Admin", but the user is correctly not deleted.
  • If the symbolic editor is open when closing Simpati, it will not be closed automatically.

Status October 2020

System requirements

Computer system IBM-compatible PC
(Intel i5, 2.2 GHz or equivalent)
Operating memory > 8 GB
Available hard drive capacity for S!MPATI® 1 GB
Supported interfaces RS 232, RS422, RS 485, IEEE 488.2 with external converter, Ethernet TCP/IP
Printer All printers supported by the operating system
Operating system (64-bit) Windows 10
Windows 8 or 8.1
Windows Server 2012
Windows Server 2016
Port enables (firewall) required See the following firewall settings
Software .NET Framework 3.5 and 4.72
Internet information service (IIS) 7.5 or higher for the S!MPATI® Web application.
The default IIS server configuration is assumed. If further security settings are configured on the server, then the web application may need to be configured correspondingly.

 

Firewall settings

Port Application Function Direction TCP UDP
21 S!MPATI® For transferring programs using SimC3K (Simpac or higher). S!MPATI®->test system x -
22 S!MPATI® For transferring programs using SFTP/SSH (new Simpacs with secure function, S!MPATI® v4.70 or higher). S!MPATI®->test system x -
25 S!MPATI® SimMailer For standard email dispatch from S!MPATI® (port-dependent from mail server). S!MPATI®->Mail Server   -
80 S!MPATI® TimeLabs For accessing the webcams. S!MPATI®->Webcam x -
80 S!MPATI® Web For web access. Client->S!MPATI® Server x -
80 Webseason/SimpacWeb For web access to Simpac. Client->test system x -
443 Weiss platform agent Communication with platform for S!MPATI® installations with Internet access. S!MPATI®->Internet x -
443 S!MPATI® TimeLabs For SSL access to the webcams. S!MPATI®->Webcam x -
443 Webseason/Https For access to Webseason. Client->test system x -
465
587
S!MPATI® SimMailer For SSL/TLS email dispatch from S!MPATI® (port-dependent from mail server). S!MPATI®->Mail Server x -
1900 S!MPATI® For the Device Finder and Maintenance. S!MPATI®->Network (broadcast) - x
2048 S!MPATI® For the SimC3K driver (to run test systems with Simpac controller). S!MPATI®->test system x -
2049 S!MPATI® For S!MPATI® setup (Simserv / S!MPATI® Plus) to configure test systems with Simpac controller. S!MPATI®->test system x -
5120 S!MPATI® TimeLabs For accessing the webcams that are a component part of the controller. S!MPATI®->test system x -
5671 Agent Weissplatform Communication with platform for S!MPATI® installations with Internet access. S!MPATI®->Internet x -
7777 S!MPATI® JBUS over TCP (for SimConNet test systems, 2006 or earlier). S!MPATI®->test system x -
7777 S!MPATI® SimServ under S!MPATI® (for SimServ customer applications). Client->S!MPATI® x -
7778 Customer application For SimServ customer applications (SimConNet). Client->test system x -
7779 Customer application For SimServ customer applications (SimConNet). Client->test system x -
8443 Controller For using the lab computer to update the test systems later. Client->test system   -
8888 S!MPATI® For encrypted SimServs protocol. Client->test system x -

License terms

1. Scope of application
The companies named above (hereinafter referred to as “WEISS”) supply computer programs in electronic form such as Simpati and PLC control and visualisation programs (hereinafter Software) to customers (licensees).

The terms and conditions indicated in the following apply exclusively to the granting of usage rights to Software by WEISS. Other general business terms and conditions of the customer shall not apply, unless expressly approved by WEISS (in writing as a minimum requirement).

2. Deliveries and services of WEISS
The scope of delivery is specified in detail by the current product description including additional information in the application documentation. WEISS supplies the Software in the version that is valid at the time of supply or provision. The scope of delivery does not include installation, instruction or training services. The Software is supplied on a data storage device or can be downloaded from a WEISS website at WEISS’ discretion. The customer receives rights to the object code of the Software exclusively. It shall not have the right to use or transfer the source code.

Services relating to the support and maintenance of the Software shall be provided by WEISS exclusively on the basis of a separate written agreement.

3. Granting of usage rights
WEISS grants the customer - subject to a divergent individual, written contractual agreement - and subject to the condition precedent of complete and timely payment of the agreed remuneration, the non-exclusive, permanent, irrevocable and irredeemable right to use the software, i.e. in particular to store or load it permanently or temporarily, display or execute it.

Unless expressly agreed otherwise, the usage rights shall be granted exclusively for the country in which the customer has its headquarters. If the customer's headquarters are within the European Union, usage rights shall apply across the EU. The customer may use the software only for the contractually stipulated purpose. Commercial sub-leasing is prohibited. Duplication of the software is permitted only to the extent necessary for use as contractually agreed. The customer may produce backup copies of the software in accordance with its codes of practice to the extent necessary. Backup copies on mobile data storage devices must be identified as such with the copyright notice of the original data storage device applied.

Should the customer transfer its usage rights to a third party, it must impose on this party its duties and obligations from these terms and conditions with respect to the content and scope of the usage rights. Transferring to a third party shall remove the customer’s entitlement to use the Software. It must delete any copies it holds of the Software, provided such are not copies produced for backing up in accordance with the terms and conditions.

The customer undertakes not to convert the software to an alternative code form or to make any changes, extensions or otherwise edit the software, except as permissible in accordance with statutory provisions.

Where WEISS provides to the customer extensions to (e.g. patches, extensions to user manual) or new editions of the software (e.g. updates, upgrades) replacing software provided previously (“outdated software”), such are subject to these terms and conditions. Where WEISS provides a new edition of the software, the entitlement of the customer to use the outdated software shall cease, including without the explicit request by WEISS to return the software, once it begins using the new edition in a productive capacity. WEISS, however, shall grant the customer a three-month transition phase in which it may continue using both versions side-by-side. Duplication or alteration of the application documentation is not permissible, subject to the above provisions.

In the case of software products of third party manufacturers sold by WEISS or third party software components implemented by WEISS, the terms and conditions of use of the respective third party manufacturer shall apply to these software packages/components in the first instance.

4. Duty of cooperation of the customer
The customer shall take reasonable precautions to safeguard against software supplied by WEISS failing to operate properly, either partially or entirely. It shall be required to test the Software thoroughly to ensure the absence of defects, its usability for the purpose it intends and in the hardware and software environment provided by it, before putting into operational use. This also applies to software that it receives from WEISS in connection with the provision of maintenance or based on warranty. The customer shall be solely responsible for ensuring the presence or establishment of a serviceable, adequately dimensioned hardware and software environment.

Furthermore, it shall ensure that its data is backed up using the latest systems. It shall ensure that any up-to-date data stored in machine-readable format is reproducible with reasonable effort. The customer shall maintain an IT security concept using the latest available systems, to consist of technical and organisational measures. This shall include in particular appropriate measures to prevent unauthorised third party access to the Software.

The customer must immediately report to WEISS any defects detected. Notifications of defects must include information on the nature of the fault, in the case of software the module in which the fault occurred, and the operations undertaken when the fault occurred. A prerequisite for supplementary performance in accordance with Section 5 is the reproducibility or detectability of the reported defect.

5. Material defects and defects of title
WEISS provides the customer with deliveries and services free of material defects and defects of title. The customer is aware that minor software bugs that do not restrict the usability of the software or which limit its use only to a negligible degree cannot be fully eliminated in software products. Bugs of this nature do not constitute software defects in terms of the warranty. In the case of software, moreover, functional impairments resulting from the hardware and software environment provided by the customer, incorrect operation, defective external data, malfunctions of computer networks or other causes originating from the area of risk of the customer are not considered defects.

WEISS shall not be responsible for software modified unlawfully by the customer, unless the customer can prove that the modification is not the cause of the reported fault. If products or services provided by WEISS are faulty and a corresponding complaint has been made in writing and in good time by the customer, WEISS shall provide replacements or rectify any issues at its discretion. WEISS is to be given the chance to do so within a reasonable time frame of at least 14 working days. In the case of software, rectification in particular may take the course of providing a new program version, or WEISS indicating reasonable methods to circumvent the effects of the fault. The customer must accept the provision of a new program version including if associated with acceptable outlay for adaptation.

Rectification in the case of defects of title occurs by WEISS providing the customer with the means to use the software legally. WEISS in this regard may replace the software product for one of equal value and which complies with contractual provisions, if acceptable to the customer. Should third parties claim against the customer on the basis of property rights, the customer must notify WEISS of this in writing immediately. WEISS shall at its discretion and in consultation with the customer defend against or settle such claims. The customer must not acknowledge third party claims or settle these amicably. WEISS shall defend against third party claims at its own expense and shall indemnify the customer against all necessary costs and losses associated with defending against such action, provided such is not due to conduct on the part of the customer in breach of the terms and conditions. If attempts at rectification fail, the customer shall be allowed to reduce the fee payable or withdraw from the contract. Withdrawal, however, is permissible only if the customer previously and explicitly threatens WEISS with this in writing with a suitable further deadline.

6. Compensation for damages
Unless otherwise stated in the following regulations, WEISS shall be liable in accordance with statutory provisions in the case of the breach of contractual and non-contractual obligations. WEISS shall be liable for compensation for damages - irrespective of the legal basis - in the context of fault liability in cases of intent and gross negligence. In the case of simple negligence, WEISS shall be liable in accordance with statutory provisions subject to a more moderate standard of liability (e.g. for diligence in own affairs) only

a) for losses resulting from loss of life, physical injury or damage to health,

b) for losses resulting from a significant breach of a material contractual obligation (an obligation the fulfilment of which is essential to the proper execution of the contract and which the contractual partner regularly expects and should expect to be complied with); in such cases, however, liability shall be limited to the compensation of predictable, typically occurring losses.

The liability limitations indicated above shall also apply to breaches of duty by or benefiting persons whose culpability WEISS is responsible for in accordance with statutory provisions. The limitations shall not apply if WEISS fraudulently conceals a defect or has assumed a quality guarantee, or to claims of the customer under the Product Liability Act [Produkthaftungsgesetz]. Statements on the properties of the Software are to be viewed as descriptive of performance and do not constitute a quality or durability guarantee as defined by Art. 443 of the German Civil Code [BGB - Bürgerliches Gesetzbuch].

In the case of data loss, WEISS shall be liable only for losses that would still have occurred had the customer properly backed up data (Section 4).

7. Liability of customer and extraordinary termination
The customer shall be liable to WEISS for all losses incurred by WEISS from the violation of copyright provisions in Section 3.

WEISS shall be entitled to revoke the usage rights granted to the customer if the customer repeatedly exceeds the usage rights granted under Section 3 despite a warning from WEISS or fails to take suitable IT security precautions using the latest systems as defined by Section 4. In this case, the customer shall be obligated to immediately cease use of the original software along with any copies and to destroy these. The customer must send a written confirmation of destruction to the address specified below.

8. Place of jurisdiction and choice of law
The law of the Federal Republic of Germany to the exclusion of the UN Convention on Contracts for the International Sale of Goods (CISG) applies to all legal relationships between WEISS and the customer based on these terms and conditions.

The parties are aware that the software may be subject to export and import restrictions. In particular, authorisation requirements may exist or usage of the software or associated technologies may be subject to restrictions outside of Germany. The customer is required to adhere to applicable export and import control provisions of the Federal Republic of Germany, the European Union and the USA, and all other relevant regulations. Fulfilment of the contract by the Licensor is subject to the proviso that fulfilment is not impeded by national and international regulations of export and import law or by any other legal provisions.

If the customer is a merchant, public-law special fund or a legal entity under public law, the exclusive place of jurisdiction for all claims resulting from the aforementioned legal relationships shall be the registered office of WEISS; where legal action is taken by WEISS, the general place of jurisdiction of the customer shall also apply.

Languages

English, German, French, Korean, Chinese, Italian, Russian, Czech, Spanish

Download version
Description
Release Notes
System requirements
License terms
Languages

More Downloads:

S!MPATI® 4.70.1 – full version and update (A S!MPATI® 4.70 license must be purchased)
 -

S!MPATI® 4.70 - Installation Manual

Installation Manual for S!MPATI® 4.70.

다운로드

S!MPATI® 4.70 - Installation Manual

Version

en 2020.09 63837141

날짜

File size

10.62 MB

Description

Installation Manual for S!MPATI® 4.70

Prior to installation:
► Take heed of the instructions in this manual, the chamber manual and the manual of the associated controller.
► As the operator, issue appropriate operating guidelines on the basis of this operating manual.
Take the relevant local and plant-internal conditions and the language of the operating personnel into account in doing so.

Download version
Description

More Downloads:

S!MPATI® 4.70.1 – full version and update (A S!MPATI® 4.70 license must be purchased)
 -

S!MPATI® Service 4.70.1

By installing the "S!MPATI Service" service module, all S!MPATI® system processes in Windows are executed as a background service and automatically...

다운로드

S!MPATI® Service 4.70.1

Version

3.1.2.0

날짜

File size

4.92 MB

Description

S!MPATI® Service 4.70.1

By installing the "Simpati Service" service module, all S!MPATI® system processes in Windows are executed as a background service and automatically started after a restart of the operating system. This allows Simpati to run even if the Windows user is logged off. For use S!MPATI® must be installed, the module itself is free of charge.

Release Notes

Simpati Service 3.1.2.0

System requirements for the Simpati Service installation
Simpati 4.70 standard package (or higher) must be installed

Compatible products
TimeLabs 4.70 (2.3.0.0 or higher)

Installation/ Uninstallation Simpati 4.70
Simpati Service 3.1.2.0

The installation routine has been revised so that a service installation based on Simpati standard package > 4.70.0 is also possible.

Simpati Service 3.1.1.0
Some Simpati installation routines are optimized with release 4.70.

  • The user is guided better through the installation process by more information and hints.
  • For the Simpati installation as a service a technical user is used whose password does not expire. This prevents that the service installation does not work correctly after the password expires.
  • For the Simpati service installation a separate installation package is now available. As a prerequisite the Simpati standard package must be installed before.
  • The uninstall routine has been optimized to remove registry, start menu and desktop entries that are no longer needed.

List of errors that have been fixed/corrected with this version
Simpati Service 3.1.1.0

  • Misleading message when trying to install Simpati as a service without a previous base installation
  • When uninstalling Simpati Service, the generated registry keys are not removed
  • When uninstalling Simpati Service, desktop shortcuts for the standard application are not created again

Known Issues and Limitations

  • Missing message for incomplete mailer configuration when installing Simpati as a service
    Remedy: Only start (activate) the mailer when all the necessary entries have been made on the settings page. (Verification by sending a test message)
  • Missing message for incomplete mailer configuration when installing Simpati as service
    Remedy: Start (activate) mailer only after all necessary entries have been made in the settings page. (Check by sending a test message) Simpati Service 4.70 Release Notes SW version 3.1.2.0
  • Missing simpati.sys- file leads to a Simconfig error when starting SimpatiService
    Remedy: Start SimConfig from the Windows start directory
  • When starting the Simpati user interface via the "Simpati Menu" desktop icon, an error message "Port / Socket exception! …" come. This has no influence on the functionality of the system.
    Remedy: Confirm the message with "OK"
  • When closing the main menu during a service installation, not all user interfaces of Simpati are automatically closed.
    Remedy: Do not only minimize user interfaces when leaving but close them.

Status October 2020

System requirements

Computer system IBM-compatible PC
(Intel i5, 2.2 GHz or equivalent)
Operating memory > 8 GB
Available hard drive capacity for S!MPATI® 1 GB
Supported interfaces RS 232, RS422, RS 485, IEEE 488.2 with external converter, Ethernet TCP/IP
Printer All printers supported by the operating system
Operating system (64-bit) Windows 10
Windows 8 or 8.1
Windows Server 2012
Windows Server 2016
Port enables (firewall) required See the following firewall settings
Software .NET Framework 3.5 and 4.72
Internet information service (IIS) 7.5 or higher for the S!MPATI® Web application.
The default IIS server configuration is assumed. If further security settings are configured on the server, then the web application may need to be configured correspondingly.

 

Firewall settings

Port Application Function Direction TCP UDP
21 S!MPATI® For transferring programs using SimC3K (Simpac or higher). S!MPATI®->test system x -
22 S!MPATI® For transferring programs using SFTP/SSH (new Simpacs with secure function, S!MPATI® v4.70 or higher). S!MPATI®->test system x -
25 S!MPATI® SimMailer For standard email dispatch from S!MPATI® (port-dependent from mail server). S!MPATI®->Mail Server   -
80 S!MPATI® TimeLabs For accessing the webcams. S!MPATI®->Webcam x -
80 S!MPATI® Web For web access. Client->S!MPATI® Server x -
80 Webseason/SimpacWeb For web access to Simpac. Client->test system x -
443 Weiss platform agent Communication with platform for S!MPATI® installations with Internet access. S!MPATI®->Internet x -
443 S!MPATI® TimeLabs For SSL access to the webcams. S!MPATI®->Webcam x -
443 Webseason/Https For access to Webseason. Client->test system x -
465
587
S!MPATI® SimMailer For SSL/TLS email dispatch from S!MPATI® (port-dependent from mail server). S!MPATI®->Mail Server x -
1900 S!MPATI® For the Device Finder and Maintenance. S!MPATI®->Network (broadcast) - x
2048 S!MPATI® For the SimC3K driver (to run test systems with Simpac controller). S!MPATI®->test system x -
2049 S!MPATI® For S!MPATI® setup (Simserv / S!MPATI® Plus) to configure test systems with Simpac controller. S!MPATI®->test system x -
5120 S!MPATI® TimeLabs For accessing the webcams that are a component part of the controller. S!MPATI®->test system x -
5671 Agent Weissplatform Communication with platform for S!MPATI® installations with Internet access. S!MPATI®->Internet x -
7777 S!MPATI® JBUS over TCP (for SimConNet test systems, 2006 or earlier). S!MPATI®->test system x -
7777 S!MPATI® SimServ under S!MPATI® (for SimServ customer applications). Client->S!MPATI® x -
7778 Customer application For SimServ customer applications (SimConNet). Client->test system x -
7779 Customer application For SimServ customer applications (SimConNet). Client->test system x -
8443 Controller For using the lab computer to update the test systems later. Client->test system   -
8888 S!MPATI® For encrypted SimServs protocol. Client->test system x -

License terms

1. Scope of application
The companies named above (hereinafter referred to as “WEISS”) supply computer programs in electronic form such as Simpati and PLC control and visualisation programs (hereinafter Software) to customers (licensees).

The terms and conditions indicated in the following apply exclusively to the granting of usage rights to Software by WEISS. Other general business terms and conditions of the customer shall not apply, unless expressly approved by WEISS (in writing as a minimum requirement).

2. Deliveries and services of WEISS
The scope of delivery is specified in detail by the current product description including additional information in the application documentation. WEISS supplies the Software in the version that is valid at the time of supply or provision. The scope of delivery does not include installation, instruction or training services. The Software is supplied on a data storage device or can be downloaded from a WEISS website at WEISS’ discretion. The customer receives rights to the object code of the Software exclusively. It shall not have the right to use or transfer the source code.

Services relating to the support and maintenance of the Software shall be provided by WEISS exclusively on the basis of a separate written agreement.

3. Granting of usage rights
WEISS grants the customer - subject to a divergent individual, written contractual agreement - and subject to the condition precedent of complete and timely payment of the agreed remuneration, the non-exclusive, permanent, irrevocable and irredeemable right to use the software, i.e. in particular to store or load it permanently or temporarily, display or execute it.

Unless expressly agreed otherwise, the usage rights shall be granted exclusively for the country in which the customer has its headquarters. If the customer's headquarters are within the European Union, usage rights shall apply across the EU. The customer may use the software only for the contractually stipulated purpose. Commercial sub-leasing is prohibited. Duplication of the software is permitted only to the extent necessary for use as contractually agreed. The customer may produce backup copies of the software in accordance with its codes of practice to the extent necessary. Backup copies on mobile data storage devices must be identified as such with the copyright notice of the original data storage device applied.

Should the customer transfer its usage rights to a third party, it must impose on this party its duties and obligations from these terms and conditions with respect to the content and scope of the usage rights. Transferring to a third party shall remove the customer’s entitlement to use the Software. It must delete any copies it holds of the Software, provided such are not copies produced for backing up in accordance with the terms and conditions.

The customer undertakes not to convert the software to an alternative code form or to make any changes, extensions or otherwise edit the software, except as permissible in accordance with statutory provisions.

Where WEISS provides to the customer extensions to (e.g. patches, extensions to user manual) or new editions of the software (e.g. updates, upgrades) replacing software provided previously (“outdated software”), such are subject to these terms and conditions. Where WEISS provides a new edition of the software, the entitlement of the customer to use the outdated software shall cease, including without the explicit request by WEISS to return the software, once it begins using the new edition in a productive capacity. WEISS, however, shall grant the customer a three-month transition phase in which it may continue using both versions side-by-side. Duplication or alteration of the application documentation is not permissible, subject to the above provisions.

In the case of software products of third party manufacturers sold by WEISS or third party software components implemented by WEISS, the terms and conditions of use of the respective third party manufacturer shall apply to these software packages/components in the first instance.

4. Duty of cooperation of the customer
The customer shall take reasonable precautions to safeguard against software supplied by WEISS failing to operate properly, either partially or entirely. It shall be required to test the Software thoroughly to ensure the absence of defects, its usability for the purpose it intends and in the hardware and software environment provided by it, before putting into operational use. This also applies to software that it receives from WEISS in connection with the provision of maintenance or based on warranty. The customer shall be solely responsible for ensuring the presence or establishment of a serviceable, adequately dimensioned hardware and software environment.

Furthermore, it shall ensure that its data is backed up using the latest systems. It shall ensure that any up-to-date data stored in machine-readable format is reproducible with reasonable effort. The customer shall maintain an IT security concept using the latest available systems, to consist of technical and organisational measures. This shall include in particular appropriate measures to prevent unauthorised third party access to the Software.

The customer must immediately report to WEISS any defects detected. Notifications of defects must include information on the nature of the fault, in the case of software the module in which the fault occurred, and the operations undertaken when the fault occurred. A prerequisite for supplementary performance in accordance with Section 5 is the reproducibility or detectability of the reported defect.

5. Material defects and defects of title
WEISS provides the customer with deliveries and services free of material defects and defects of title. The customer is aware that minor software bugs that do not restrict the usability of the software or which limit its use only to a negligible degree cannot be fully eliminated in software products. Bugs of this nature do not constitute software defects in terms of the warranty. In the case of software, moreover, functional impairments resulting from the hardware and software environment provided by the customer, incorrect operation, defective external data, malfunctions of computer networks or other causes originating from the area of risk of the customer are not considered defects.

WEISS shall not be responsible for software modified unlawfully by the customer, unless the customer can prove that the modification is not the cause of the reported fault. If products or services provided by WEISS are faulty and a corresponding complaint has been made in writing and in good time by the customer, WEISS shall provide replacements or rectify any issues at its discretion. WEISS is to be given the chance to do so within a reasonable time frame of at least 14 working days. In the case of software, rectification in particular may take the course of providing a new program version, or WEISS indicating reasonable methods to circumvent the effects of the fault. The customer must accept the provision of a new program version including if associated with acceptable outlay for adaptation.

Rectification in the case of defects of title occurs by WEISS providing the customer with the means to use the software legally. WEISS in this regard may replace the software product for one of equal value and which complies with contractual provisions, if acceptable to the customer. Should third parties claim against the customer on the basis of property rights, the customer must notify WEISS of this in writing immediately. WEISS shall at its discretion and in consultation with the customer defend against or settle such claims. The customer must not acknowledge third party claims or settle these amicably. WEISS shall defend against third party claims at its own expense and shall indemnify the customer against all necessary costs and losses associated with defending against such action, provided such is not due to conduct on the part of the customer in breach of the terms and conditions. If attempts at rectification fail, the customer shall be allowed to reduce the fee payable or withdraw from the contract. Withdrawal, however, is permissible only if the customer previously and explicitly threatens WEISS with this in writing with a suitable further deadline.

6. Compensation for damages
Unless otherwise stated in the following regulations, WEISS shall be liable in accordance with statutory provisions in the case of the breach of contractual and non-contractual obligations. WEISS shall be liable for compensation for damages - irrespective of the legal basis - in the context of fault liability in cases of intent and gross negligence. In the case of simple negligence, WEISS shall be liable in accordance with statutory provisions subject to a more moderate standard of liability (e.g. for diligence in own affairs) only

a) for losses resulting from loss of life, physical injury or damage to health,

b) for losses resulting from a significant breach of a material contractual obligation (an obligation the fulfilment of which is essential to the proper execution of the contract and which the contractual partner regularly expects and should expect to be complied with); in such cases, however, liability shall be limited to the compensation of predictable, typically occurring losses.

The liability limitations indicated above shall also apply to breaches of duty by or benefiting persons whose culpability WEISS is responsible for in accordance with statutory provisions. The limitations shall not apply if WEISS fraudulently conceals a defect or has assumed a quality guarantee, or to claims of the customer under the Product Liability Act [Produkthaftungsgesetz]. Statements on the properties of the Software are to be viewed as descriptive of performance and do not constitute a quality or durability guarantee as defined by Art. 443 of the German Civil Code [BGB - Bürgerliches Gesetzbuch].

In the case of data loss, WEISS shall be liable only for losses that would still have occurred had the customer properly backed up data (Section 4).

7. Liability of customer and extraordinary termination
The customer shall be liable to WEISS for all losses incurred by WEISS from the violation of copyright provisions in Section 3.

WEISS shall be entitled to revoke the usage rights granted to the customer if the customer repeatedly exceeds the usage rights granted under Section 3 despite a warning from WEISS or fails to take suitable IT security precautions using the latest systems as defined by Section 4. In this case, the customer shall be obligated to immediately cease use of the original software along with any copies and to destroy these. The customer must send a written confirmation of destruction to the address specified below.

8. Place of jurisdiction and choice of law
The law of the Federal Republic of Germany to the exclusion of the UN Convention on Contracts for the International Sale of Goods (CISG) applies to all legal relationships between WEISS and the customer based on these terms and conditions.

The parties are aware that the software may be subject to export and import restrictions. In particular, authorisation requirements may exist or usage of the software or associated technologies may be subject to restrictions outside of Germany. The customer is required to adhere to applicable export and import control provisions of the Federal Republic of Germany, the European Union and the USA, and all other relevant regulations. Fulfilment of the contract by the Licensor is subject to the proviso that fulfilment is not impeded by national and international regulations of export and import law or by any other legal provisions.

If the customer is a merchant, public-law special fund or a legal entity under public law, the exclusive place of jurisdiction for all claims resulting from the aforementioned legal relationships shall be the registered office of WEISS; where legal action is taken by WEISS, the general place of jurisdiction of the customer shall also apply.

Languages

English, German, French, Korean, Chinese, Italian, Russian, Czech, Spanish

Download version
Description
Release Notes
System requirements
License terms
Languages

More Downloads:

S!MPATI® Service 4.70 - Installation Manual
 -

S!MPATI® Service 4.70 - Installation Manual

Installation Manual for S!MPATI® Service 4.70.

다운로드

S!MPATI® Service 4.70 - Installation Manual

Version

en 2020.09

날짜

File size

837.97 KB

Description

Installation Manual for S!MPATI® Service 4.70. 

Prior to installation:
► Before installing the S!MPATI®4.70 software, please read all of the instructions in this operating manual, the operating manual for the chamber and its controller.
► As the operator, issue appropriate operating guidelines on the basis of this operating manual. Take the relevant local and plant-internal conditions and the language of the operating personnel into account in doing so.

Download version
Description

More Downloads:

S!MPATI® Service 4.70.1
 -

S!MPATI® TimeLabs for 2016 and 4.70

S!MPATI® time labs enables the simultaneous recording of measurement data and images from cameras and the displaying with the evaluation software included in S!MPATI®.

다운로드

S!MPATI® TimeLabs for 2016 and 4.70

Version

2.3.0.0

날짜

File size

10.53 MB

Description

S!MPATI® time labs for Simpati 2016 and 4.70

S!MPATI® time labs enables the simultaneous recording of measurement data and images from cameras and the displaying with the evaluation software included in S!MPATI®. To use it, S!MPATI® must be installed and an extra license must be purchased.

Release Notes

System requirements for the Simpati installation
Can be found in the corresponding operating instructions and in the download area for our software at:
www.weiss-technik.com/software

Compatible products
Simpati 4.70, Simpati 2016, Simpati 4.50
SimpatiService 4.70 (from 3.0.0.0)

Installation/ Uninstallation Simpati TimeLabs 4.70
The installation routine was optimized with release 4.70.

  • The user is better guided through the installation process by more information and hints.
  • There is now a separate installation package for SimTimeLabs
  • During installation, the installation language can be selected from 9 available languages
  • The uninstall routine has been optimized to remove registry, start menu and desktop entries that are no longer needed.
  • Support of Windows 10

Improvements within the application

  • The user interface for the camera configuration has been revised
  • Entering the WebUrl address is now easier
  • The selection of available cameras is now visualized by images.
  • Performance and stability is improved

March 2020

System requirements

Computer system IBM-compatible PC
(Intel i5, 2.2 GHz or equivalent)
Operating memory > 8 GB
Available hard drive capacity for S!MPATI® 1 GB
Supported interfaces RS 232, RS422, RS 485, IEEE 488.2 with external converter, Ethernet TCP/IP
Printer All printers supported by the operating system
Operating system (64-bit) Windows 10
Windows 8 or 8.1
Windows Server 2012
Windows Server 2016
Port enables (firewall) required See the following firewall settings
Software .NET Framework 3.5 and 4.72
Internet information service (IIS) 7.5 or higher for the S!MPATI® Web application.
The default IIS server configuration is assumed. If further security settings are configured on the server, then the web application may need to be configured correspondingly.

 

Firewall settings

Port Application Function Direction TCP UDP
21 S!MPATI® For transferring programs using SimC3K (Simpac or higher). S!MPATI®->test system x -
22 S!MPATI® For transferring programs using SFTP/SSH (new Simpacs with secure function, S!MPATI® v4.70 or higher). S!MPATI®->test system x -
25 S!MPATI® SimMailer For standard email dispatch from S!MPATI® (port-dependent from mail server). S!MPATI®->Mail Server   -
80 S!MPATI® TimeLabs For accessing the webcams. S!MPATI®->Webcam x -
80 S!MPATI® Web For web access. Client->S!MPATI® Server x -
80 Webseason/SimpacWeb For web access to Simpac. Client->test system x -
443 Weiss platform agent Communication with platform for S!MPATI® installations with Internet access. S!MPATI®->Internet x -
443 S!MPATI® TimeLabs For SSL access to the webcams. S!MPATI®->Webcam x -
443 Webseason/Https For access to Webseason. Client->test system x -
465
587
S!MPATI® SimMailer For SSL/TLS email dispatch from S!MPATI® (port-dependent from mail server). S!MPATI®->Mail Server x -
1900 S!MPATI® For the Device Finder and Maintenance. S!MPATI®->Network (broadcast) - x
2048 S!MPATI® For the SimC3K driver (to run test systems with Simpac controller). S!MPATI®->test system x -
2049 S!MPATI® For S!MPATI® setup (Simserv / S!MPATI® Plus) to configure test systems with Simpac controller. S!MPATI®->test system x -
5120 S!MPATI® TimeLabs For accessing the webcams that are a component part of the controller. S!MPATI®->test system x -
5671 Agent Weissplatform Communication with platform for S!MPATI® installations with Internet access. S!MPATI®->Internet x -
7777 S!MPATI® JBUS over TCP (for SimConNet test systems, 2006 or earlier). S!MPATI®->test system x -
7777 S!MPATI® SimServ under S!MPATI® (for SimServ customer applications). Client->S!MPATI® x -
7778 Customer application For SimServ customer applications (SimConNet). Client->test system x -
7779 Customer application For SimServ customer applications (SimConNet). Client->test system x -
8443 Controller For using the lab computer to update the test systems later. Client->test system   -
8888 S!MPATI® For encrypted SimServs protocol. Client->test system x -

License terms

1. Scope of application
The companies named above (hereinafter referred to as “WEISS”) supply computer programs in electronic form such as Simpati and PLC control and visualisation programs (hereinafter Software) to customers (licensees).

The terms and conditions indicated in the following apply exclusively to the granting of usage rights to Software by WEISS. Other general business terms and conditions of the customer shall not apply, unless expressly approved by WEISS (in writing as a minimum requirement).

2. Deliveries and services of WEISS
The scope of delivery is specified in detail by the current product description including additional information in the application documentation. WEISS supplies the Software in the version that is valid at the time of supply or provision. The scope of delivery does not include installation, instruction or training services. The Software is supplied on a data storage device or can be downloaded from a WEISS website at WEISS’ discretion. The customer receives rights to the object code of the Software exclusively. It shall not have the right to use or transfer the source code.

Services relating to the support and maintenance of the Software shall be provided by WEISS exclusively on the basis of a separate written agreement.

3. Granting of usage rights
WEISS grants the customer - subject to a divergent individual, written contractual agreement - and subject to the condition precedent of complete and timely payment of the agreed remuneration, the non-exclusive, permanent, irrevocable and irredeemable right to use the software, i.e. in particular to store or load it permanently or temporarily, display or execute it.

Unless expressly agreed otherwise, the usage rights shall be granted exclusively for the country in which the customer has its headquarters. If the customer's headquarters are within the European Union, usage rights shall apply across the EU. The customer may use the software only for the contractually stipulated purpose. Commercial sub-leasing is prohibited. Duplication of the software is permitted only to the extent necessary for use as contractually agreed. The customer may produce backup copies of the software in accordance with its codes of practice to the extent necessary. Backup copies on mobile data storage devices must be identified as such with the copyright notice of the original data storage device applied.

Should the customer transfer its usage rights to a third party, it must impose on this party its duties and obligations from these terms and conditions with respect to the content and scope of the usage rights. Transferring to a third party shall remove the customer’s entitlement to use the Software. It must delete any copies it holds of the Software, provided such are not copies produced for backing up in accordance with the terms and conditions.

The customer undertakes not to convert the software to an alternative code form or to make any changes, extensions or otherwise edit the software, except as permissible in accordance with statutory provisions.

Where WEISS provides to the customer extensions to (e.g. patches, extensions to user manual) or new editions of the software (e.g. updates, upgrades) replacing software provided previously (“outdated software”), such are subject to these terms and conditions. Where WEISS provides a new edition of the software, the entitlement of the customer to use the outdated software shall cease, including without the explicit request by WEISS to return the software, once it begins using the new edition in a productive capacity. WEISS, however, shall grant the customer a three-month transition phase in which it may continue using both versions side-by-side. Duplication or alteration of the application documentation is not permissible, subject to the above provisions.

In the case of software products of third party manufacturers sold by WEISS or third party software components implemented by WEISS, the terms and conditions of use of the respective third party manufacturer shall apply to these software packages/components in the first instance.

4. Duty of cooperation of the customer
The customer shall take reasonable precautions to safeguard against software supplied by WEISS failing to operate properly, either partially or entirely. It shall be required to test the Software thoroughly to ensure the absence of defects, its usability for the purpose it intends and in the hardware and software environment provided by it, before putting into operational use. This also applies to software that it receives from WEISS in connection with the provision of maintenance or based on warranty. The customer shall be solely responsible for ensuring the presence or establishment of a serviceable, adequately dimensioned hardware and software environment.

Furthermore, it shall ensure that its data is backed up using the latest systems. It shall ensure that any up-to-date data stored in machine-readable format is reproducible with reasonable effort. The customer shall maintain an IT security concept using the latest available systems, to consist of technical and organisational measures. This shall include in particular appropriate measures to prevent unauthorised third party access to the Software.

The customer must immediately report to WEISS any defects detected. Notifications of defects must include information on the nature of the fault, in the case of software the module in which the fault occurred, and the operations undertaken when the fault occurred. A prerequisite for supplementary performance in accordance with Section 5 is the reproducibility or detectability of the reported defect.

5. Material defects and defects of title
WEISS provides the customer with deliveries and services free of material defects and defects of title. The customer is aware that minor software bugs that do not restrict the usability of the software or which limit its use only to a negligible degree cannot be fully eliminated in software products. Bugs of this nature do not constitute software defects in terms of the warranty. In the case of software, moreover, functional impairments resulting from the hardware and software environment provided by the customer, incorrect operation, defective external data, malfunctions of computer networks or other causes originating from the area of risk of the customer are not considered defects.

WEISS shall not be responsible for software modified unlawfully by the customer, unless the customer can prove that the modification is not the cause of the reported fault. If products or services provided by WEISS are faulty and a corresponding complaint has been made in writing and in good time by the customer, WEISS shall provide replacements or rectify any issues at its discretion. WEISS is to be given the chance to do so within a reasonable time frame of at least 14 working days. In the case of software, rectification in particular may take the course of providing a new program version, or WEISS indicating reasonable methods to circumvent the effects of the fault. The customer must accept the provision of a new program version including if associated with acceptable outlay for adaptation.

Rectification in the case of defects of title occurs by WEISS providing the customer with the means to use the software legally. WEISS in this regard may replace the software product for one of equal value and which complies with contractual provisions, if acceptable to the customer. Should third parties claim against the customer on the basis of property rights, the customer must notify WEISS of this in writing immediately. WEISS shall at its discretion and in consultation with the customer defend against or settle such claims. The customer must not acknowledge third party claims or settle these amicably. WEISS shall defend against third party claims at its own expense and shall indemnify the customer against all necessary costs and losses associated with defending against such action, provided such is not due to conduct on the part of the customer in breach of the terms and conditions. If attempts at rectification fail, the customer shall be allowed to reduce the fee payable or withdraw from the contract. Withdrawal, however, is permissible only if the customer previously and explicitly threatens WEISS with this in writing with a suitable further deadline.

6. Compensation for damages
Unless otherwise stated in the following regulations, WEISS shall be liable in accordance with statutory provisions in the case of the breach of contractual and non-contractual obligations. WEISS shall be liable for compensation for damages - irrespective of the legal basis - in the context of fault liability in cases of intent and gross negligence. In the case of simple negligence, WEISS shall be liable in accordance with statutory provisions subject to a more moderate standard of liability (e.g. for diligence in own affairs) only

a) for losses resulting from loss of life, physical injury or damage to health,

b) for losses resulting from a significant breach of a material contractual obligation (an obligation the fulfilment of which is essential to the proper execution of the contract and which the contractual partner regularly expects and should expect to be complied with); in such cases, however, liability shall be limited to the compensation of predictable, typically occurring losses.

The liability limitations indicated above shall also apply to breaches of duty by or benefiting persons whose culpability WEISS is responsible for in accordance with statutory provisions. The limitations shall not apply if WEISS fraudulently conceals a defect or has assumed a quality guarantee, or to claims of the customer under the Product Liability Act [Produkthaftungsgesetz]. Statements on the properties of the Software are to be viewed as descriptive of performance and do not constitute a quality or durability guarantee as defined by Art. 443 of the German Civil Code [BGB - Bürgerliches Gesetzbuch].

In the case of data loss, WEISS shall be liable only for losses that would still have occurred had the customer properly backed up data (Section 4).

7. Liability of customer and extraordinary termination
The customer shall be liable to WEISS for all losses incurred by WEISS from the violation of copyright provisions in Section 3.

WEISS shall be entitled to revoke the usage rights granted to the customer if the customer repeatedly exceeds the usage rights granted under Section 3 despite a warning from WEISS or fails to take suitable IT security precautions using the latest systems as defined by Section 4. In this case, the customer shall be obligated to immediately cease use of the original software along with any copies and to destroy these. The customer must send a written confirmation of destruction to the address specified below.

8. Place of jurisdiction and choice of law
The law of the Federal Republic of Germany to the exclusion of the UN Convention on Contracts for the International Sale of Goods (CISG) applies to all legal relationships between WEISS and the customer based on these terms and conditions.

The parties are aware that the software may be subject to export and import restrictions. In particular, authorisation requirements may exist or usage of the software or associated technologies may be subject to restrictions outside of Germany. The customer is required to adhere to applicable export and import control provisions of the Federal Republic of Germany, the European Union and the USA, and all other relevant regulations. Fulfilment of the contract by the Licensor is subject to the proviso that fulfilment is not impeded by national and international regulations of export and import law or by any other legal provisions.

If the customer is a merchant, public-law special fund or a legal entity under public law, the exclusive place of jurisdiction for all claims resulting from the aforementioned legal relationships shall be the registered office of WEISS; where legal action is taken by WEISS, the general place of jurisdiction of the customer shall also apply.

Languages

English, German, French, Korean, Chinese, Italian, Russian, Czech, Spanish

Download version
Description
Release Notes
System requirements
License terms
Languages

More Downloads:

S!MPATI® TimeLabs 4.70 - Installation Manual
 -

S!MPATI® TimeLabs 4.70 - Installation Manual

Installation Manual for S!MPATI® TimeLabs 4.70.

다운로드

S!MPATI® TimeLabs 4.70 - Installation Manual

Version

4.70

날짜

File size

3.12 MB

Description

Installation Manual for S!MPATI® TimeLabs 4.70

► Read this document first to avoid malfunctions and any associated consequential damage.
► Retain this document for later reference.
► Observe the safety regulations during use.
► Read other associated operating manuals and safety regulations prior to use.

Download version
Description

More Downloads:

S!MPATI® TimeLabs for 2016 and 4.70
 -

Weiss IoT Gateway 1.0

Das Weiss IoT Gateway ist ein Zusatzprogramm für S!MPATI® 4.70 und wird benötigt, um Daten von S!MPATI® in die Cloud zu S!MPATI® online zu übertragen.

다운로드

Weiss IoT Gateway 1.0

Version

1.0

날짜

File size

48.71 MB

Beschreibung

Weiss IoT Gateway 1.0

Das Weiss IoT Gateway ist ein Zusatzprogramm für S!MPATI® 4.70 und wird benötigt, um Daten von S!MPATI® in die Cloud zu S!MPATI® online zu übertragen. Zur Verwendung muss S!MPATI® 4.70 installiert und ein Benutzerkonto in S!MPATI® online angelegt sein.

Release Notes

Simpati_4_70_Weiss IoT Gateway 1.0.0
Release Notes

Diese Release Notes beschreiben den Inhalt und den Zweck des IoT-Gateways Simpati_4_70_Weiss, welches nachfolgend Weiss IoT-Gateway genannt wird.

Dies ist die erste stabile Version, die für die Produktion freigegeben wurde.

Systemanforderungen für die Installation des Weiss IoT Gateway Software:
Ein installiertes und lauffähiges Simpati 4.70 ist erforderlich.

Erstellt für .NET Core 3.1 LTS. Das Framework ist auch im Deployment-Paket enthalten.

Hardware:
Sie finden sie in den Bedienungsanleitungen Simpati_4_70_Weiss IoT Gateway und Simpati 4.70, sowie im Downloadbereich für unsere Software unter:

www.weiss-technik.com/software

Kompatible Produkte
Das Weiss IoT Gateway sammelt Daten von Simpati unter Verwendung des SimServ-Protokolls. Kompatibel zu simserv.exe von Simpati 4.70.

Nur die Controller-Typen CONTROLLER_C2K (33333) und CONTROLLER_C3K (44444) werden unterstützt. Kammern anderer Controller werden ignoriert. Es wird eine Warnmeldung protokolliert.

Weiss IoT Gateway
Die Software wird als Windows-Dienst geliefert, der eine ASP.NET Core-Webanwendung startet. Sie enthält eine browserbasierte Anwendung, die ein Dashboard und Werkzeuge für die Überwachung sowie Diagnose bereitstellt.

Die Browser-basierte App bietet eine Möglichkeit, sich bei Simpati Online anzumelden und die Anwendung zu registrieren. Nach der Registrierung veröffentlicht die Anwendung in regelmäßigen Abständen Daten an den Azure IoT Hub. Die veröffentlichten Daten umfassen: Simpati-Metadaten, Kammer-Metadaten, Kammerprofile, Kammermodus und -zustand, Kammerfehler und andere Benachrichtigungen, Kammertelemetrie (Profilwerte und -grenzen).

Das Weiss IoT-Gateway prüft jede Sekunde auf Fehler, Benachrichtigungen oder Modus- und Zustandsänderungen und veröffentlicht die Änderung, wenn sie entdeckt wird. Dies umfasst sowohl das Kommen als auch das Gehen von Fehlern. Die Software plant die Veröffentlichung von Telemetriedaten in einem Intervall, das aus der Einstellung "Archivierungsrate" im Dialog "Kammerkonfiguration" in Simpati übernommen wird.
Alle 5 Sekunden wird geprüft, ob sich diese Einstellung geändert hat.
Der Verbindungs- und Unterbrechungszustand und die Metadaten werden veröffentlicht, sobald eine Änderung ihres Wertes festgestellt wird.
Wenn die Verbindung zum IoT-Hub unterbrochen wird, werden die Nachrichten im Speicher in eine Warteschlange gestellt. Die Warteschlange wird periodisch auf der Festplatte gespeichert. Diese Warteschlange wird mit einer Prüfsumme gegen Manipulation signiert.
Wenn die Verbindung erhalten bleibt und als stabil angesehen wird, werden die Nachrichten in der Warteschlange zuerst gesendet, bevor neue Nachrichten verarbeitet werden.
Das Weiss IoT-Gateway veröffentlicht keine kammerbezogenen Daten, solange die Kammer offline ist. Dies gilt für alle Kammern während Simpati offline ist.

Die Kammern werden durch ihre interne Seriennummer identifiziert. Wenn eine Kammer oder ein Controller keine Seriennummer oder eine ungültige Seriennummer überträgt, dann generiert und verwendet das Weiss IoT Gateway eine Fallback-Seriennummer.
Das Weiss IoT-Gateway wird durch eine Simpati-Seriennummer und eine eindeutige ID identifiziert. Die eindeutige ID wird pro installierter Instanz des Weiss IoT-Gateways generiert.

Fehler, die sich auf die Anwendung selbst beziehen (z. B. Kommunikation, Registrierung usw.), werden auf dem Dashboard in der Webanwendung angezeigt und nach deren Behebung aus dem Dashboard entfernt.

Diese Software unterstützt verschiedene Ebenen und Kategorien der Protokollierung. Die Protokollierung kann so konfiguriert werden, dass ausgewählte Bedenken in einer ausgewählten Ausführlichkeitsstufe protokolliert werden. Pro Tag wird eine Protokolldatei erstellt. Die Protokolldateien werden nach einer konfigurierten Anzahl von Tagen entfernt (Standardwert: 14 Tage).

Die Stabilität der Anwendung wie

  • Speicherverbrauch,
  • reier Plattenplatz,
  • Datenverkehr,
  • Größe der Nachrichten-Warteschlange,
  • Betrieb der Dienste,

wird ständig überwacht und in der Webanwendung angezeigt.

Das Weiss IoT-Gateway enthält eine Fehlerreporter-Funktion, in der eine ZIP-Datei mit aktuellen Protokollen und Informationen über den Status der Kammer und den Zustand der Applikation heruntergeladen werden kann.

Es unterstützt verschiedene Bereitstellungsphasen (Entwicklung, „Preview“, Integration und Produktion).

Es unterstützt die Konfiguration von SimServ-Verbindungseinstellungen und Proxy-Einstellungen.

Liste der mit dieser Version behobenen/korrigierten Fehler
-keine Einträge

Bekannte Probleme und Einschränkungen
-keine Einträge

Systemvorraussetzung

Rechnersystem IBM-kompatibler PC
Arbeitsspeicher

siehe Simpati 4.70

Festplattenkapazität frei für Weiss IoT Gateway mind. 500 MB zzgl. Kapazität für Offline-Puffer (siehe auch Hinweis zum Offline-Betrieb).
Unterstützte Schnittstellen RS 232, RS422, RS 485, IEEE 488.2 mit externem Umsetzer, Ethernet TCP/IP
Betriebssystem siehe Simpati 4.70
Benötigte Port-Freigaben (Firewall) Für die Kommunikation mit der Cloud via Ethernet TCP/IP werden die Ports 443 und 5671 benötigt. Diese Ports dürfen durch eine Firewall nicht blockiert werden.
Die Kommunikation mit Simpati erfolgt über das SimServ-Protokoll und läuft standardmäßig über localhost Port 7779.
Der Webserver für die Browseranwendung des Weiss IoT Gateways hört auf Port 5000. Es wird empfohlen, den Zugriff auf diesen Port für Anfragen von außen zu blockieren.

 

Hinweis zum Offline-Betrieb
Das Weiss IoT Gateway benötigt eine zuverlässige Internetverbindung. Sollte die Internetverbindung einmal ausfallen, werden die Daten weiterhin aus Simpati ausgelesen, jedoch stattdessen in einer Datei auf Ihrem PC zwischengespeichert (Offline-Puffer). Nach Wiederaufnahme der Verbindung wird zunächst der Inhalt des Offline-Puffers in die Cloud übertragen und danach geht die Verarbeitung normal weiter.

Lizenzbedingungen

1. Geltungsbereich
Die oben genannten Gesellschaften (im Folgenden „WEISS“ genannt) liefern in elektronischer Form Computerprogramme wie Simpati sowie SPS Steuerungs- und Visualisierungsprogramme (im Folgenden Software) an Kunden (Lizenznehmer).

Für die Einräumung von Nutzungsrechten an Software von WEISS gelten ausschließlich die nachstehenden Bedingungen. Anderslautende allgemeine Geschäftsbedingungen des Kunden finden keine Anwendung, es sei denn WEISS hätte diesen ausdrücklich (mindestens in Textform) zugestimmt.

2. Lieferungen und Leistungen von WEISS
Der Lieferumfang ergibt sich im Einzelnen aus der jeweils aktuellen Produktbeschreibung einschließlich ergänzender Angaben in der Anwendungsdokumentation. WEISS liefert die Software in der zum Lieferoder Bereitstellungszeitpunkt aktuellen Fassung. Installations-, Einweisungs- und Schulungsleistungen sind nicht im Lieferumfang enthalten. Die Lieferung der Software erfolgt nach Wahl von WEISS per Datenträger oder im Wege des Online-Abrufes (Download) über eine Website von WEISS. Der Kunde erhält ausschließlich Rechte am Objektcode der Software. Er hat keinen Anspruch auf Nutzung oder Übergabe des Quellcodes.

Leistungen bezüglich des Supportes und der Pflege der Software erbringt WEISS nur aufgrund gesonderter schriftlicher Vereinbarung.

3. Einräumung von Nutzungsrechten
WEISS räumt dem Kunden - vorbehaltlich einer abweichenden individualvertraglichen, schriftlichen Vereinbarung - aufschiebend bedingt auf den Zeitpunkt der vollständigen Zahlung der vereinbarten Vergütung, das nicht ausschließliche, dauerhafte, unwiderrufliche und unkündbare Recht ein, die Software zu nutzen, das heißt insbesondere dauerhaft oder temporär zu speichern und zu laden, sie anzuzeigen und ablaufen zu lassen.

Ohne ausdrückliche Vereinbarung wird das Nutzungsrecht ausschließlich für das Land eingeräumt, in dem der Kunde seinen Geschäftssitz hat. Ist der Geschäftssitz innerhalb der Europäischen Union, gilt das Nutzungsrecht EU-weit. Der Kunde darf die Software nur zu dem vertraglich vorgesehenen Zweck nutzen. Die gewerbliche Weitervermietung ist untersagt. Vervielfältigungen der Software sind nur insoweit zulässig, als dies für den vertragsgemäßen Gebrauch notwendig ist. Der Kunde darf von der Software Sicherungskopien nach den Regeln der Technik im notwendigen Umfang anfertigen. Sicherungskopien auf beweglichen Datenträgern sind als solche zu kennzeichnen und mit dem Urheberrechtsvermerk des Originaldatenträgers zu versehen.

Überträgt der Kunde sein Nutzungsrecht an einen Dritten, hat er seine Verpflichtungen aus diesen Bedingungen hinsichtlich Inhaltes und Umfang der Nutzungsrechte dem Dritten aufzuerlegen. Mit der Übertragung an den Dritten ist der Kunde nicht mehr zur Nutzung berechtigt. Er hat etwaige Kopien der Software zu löschen, soweit es sich nicht um Kopien zur ordnungsgemäßen Datensicherung handelt.

Der Kunde verpflichtet sich, die Software nicht in eine andere Codeform zu bringen und keine Änderungen, Erweiterungen oder sonstige Bearbeitungen der Software vorzunehmen, es sei denn, dass dies nach den gesetzlichen Vorschriften zulässig ist.

Überlässt WEISS dem Kunden im Rahmen von Nachbesserung oder Pflege Ergänzungen (z. B. Patches, Ergänzungen des Bedienerhandbuches) oder eine Neuauflage der Software (z. B. Update, Upgrade), die früher überlassene Software („Altsoftware“) ersetzt, unterliegen sie diesen Bestimmungen. Stellt WEISS eine Neuauflage der Software zur Verfügung, so erlöschen in Bezug auf die Altsoftware die Befugnisse des Kunden auch ohne ausdrückliches Rückgabeverlangen von WEISS, sobald der Kunde die neue Software produktiv nutzt. WEISS räumt dem Kunden jedoch eine dreimonatige Übergangsphase ein, in der beide Versionen nebeneinander genutzt werden dürfen. Eine Vervielfältigung oder Umarbeitung der Anwendungsdokumentation ist – vorbehaltlich des Vorgenannten – nicht gestattet.

Bei durch WEISS vertriebenen Softwareprodukten von Drittherstellern bzw. implementierten Drittsoftwareelementen gelten die Nutzungsbedingungen der Dritthersteller für diese Software(teile) vorrangig.

4. Mitwirkungspflichten des Kunden
Der Kunde trifft angemessene Vorkehrungen für den Fall, dass von WEISS gelieferte Software ganz oder teilweise nicht ordnungsgemäß arbeitet. Er wird die Software gründlich auf Mangelfreiheit, deren Verwendbarkeit zu dem von ihm beabsichtigten Zweck und in der von ihm zur Verfügung gestellten

Hard- und Softwareumgebung testen, bevor er diese operativ einsetzt. Dies gilt auch für Software, die er von WEISS im Rahmen der Gewährleistung oder Pflege erhält. Das Vorhandensein oder die Einrichtung einer funktionsfähigen, ausreichend dimensionierten Hard- und Softwareumgebung liegt in der alleinigen Verantwortung des Kunden.

Weiterhin wird er seine Daten nach dem Stand der Technik sichern. Er stellt sicher, dass die aktuellen Daten aus in maschinenlesbarer Form bereitgehaltenen Datenbeständen mit vertretbarem Aufwand reproduzierbar sind. Der Kunde unterhält ein dem Stand der Technik entsprechendes IT Sicherheitskonzept bestehend aus technischen und organisatorischen Maßnahmen. Im Rahmen dessen trifft er insbesondere angemessene Maßnahmen, um die Software vor dem unbefugten Zugriff durch Dritte zu schützen.

Festgestellte Mängel hat der Kunde unverzüglich an WEISS zu melden. Die Mängelrüge muss Informationen über die Art des Fehlers, bei Software das Modul, in dem der Fehler aufgetreten ist, sowie die Arbeiten, die bei Auftreten des Fehlers durchgeführt wurden, enthalten. Voraussetzung für die Nacherfüllung gemäß Ziffer 5 ist die Reproduzierbarkeit oder Feststellbarkeit eines gemeldeten Mangels.

5. Sach- und Rechtsmängel
WEISS verschafft dem Kunden Lieferungen und Leistungen frei von Sach- und Rechtsmängeln. Dem Kunden ist bewusst, dass kleinere Programmfehler, die die Nutzbarkeit der Software nicht oder nur unerheblich einschränken, bei Softwareprodukten nicht vollständig ausgeschlossen werden können. Solche unerheblichen Fehler stellen keinen Mangel der Software im Sinne der Gewährleistung dar. Bei Software sind ferner solche Funktionsbeeinträchtigungen keine Mängel, die aus der vom Kunden zur Verfügung gestellten Hardware- und Softwareumgebung, Fehlbedienung, externen schadhaften Daten, Störungen von Rechnernetzen oder sonstigen aus dem Risikobereich des Kunden stammenden Gründen resultieren.

Für Software, die vom Kunden widerrechtlich geändert worden ist, hat WEISS nicht einzustehen, es sei denn, der Kunde weist nach, dass die Änderung für den gemeldeten Mangel nicht ursächlich ist. Soweit Lieferungen und Leistungen von WEISS mangelhaft sind und dies vom Kunden rechtzeitig schriftlich beanstandet wurde, wird WEISS nach seiner Wahl nachliefern oder nachbessern (Nacherfüllung). Hierzu ist WEISS Gelegenheit innerhalb angemessener Frist von mindestens vierzehn Werktagen zu gewähren. Bei Software kann die Nacherfüllung insbesondere durch Überlassung einer neuen Programmversion oder dadurch erfolgen, dass WEISS zumutbare Möglichkeiten aufzeigt, die Auswirkungen des Mangels zu umgehen. Eine neue Programmversion muss vom Kunden auch dann übernommen werden, wenn dies für ihn zu einem hinnehmbaren Anpassungsaufwand führt.

Die Nacherfüllung bei Rechtsmängeln erfolgt, indem WEISS dem Kunden eine rechtlich einwandfreie Nutzungsmöglichkeit an der Software verschafft. WEISS kann hierbei die betroffene Software gegen eine gleichwertige, den vertraglichen Bestimmungen entsprechende Software austauschen, wenn dies für den Kunden hinnehmbar ist. Falls Dritte Schutzrechte gegen den Kunden geltend machen, unterrichtet dieser WEISS unverzüglich schriftlich. WEISS wird nach seiner Wahl und in Absprache mit dem Kunden die Ansprüche abwehren oder befriedigen. Der Kunde darf von sich aus die Ansprüche Dritter nicht anerkennen oder die Inanspruchnahme gütlich beilegen. WEISS wehrt die Ansprüche Dritter auf eigene Kosten ab und stellt den Kunden von allen mit der Anspruchsabwehr verbundenen notwendigen Kosten und Schäden frei, soweit diese nicht auf einem pflichtwidrigen Verhalten des Kunden beruhen. Schlägt die Nacherfüllung fehl, kann der Kunde die Vergütung mindern oder vom Vertrag zurücktreten. Der Rücktritt ist allerdings nur zulässig, wenn der Kunde WEISS dies zuvor ausdrücklich schriftlich mit einer angemessenen weiteren Nachfrist androht.

6. Schadensersatz
Soweit sich aus den nachfolgenden Regelungen nichts Abweichendes ergibt, haftet WEISS bei einer Verletzung von vertraglichen und außervertraglichen Pflichten nach den gesetzlichen Vorschriften.

WEISS haftet auf Schadensersatz – gleich aus welchem Rechtsgrund – im Rahmen der Verschuldenshaftung bei Vorsatz und grober Fahrlässigkeit. Bei einfacher Fahrlässigkeit haftet WEISS vorbehaltlich eines milderen Haftungsmaßstabs nach den gesetzlichen Vorschriften (z.B. für Sorgfalt in eigenen Angelegenheiten) nur

a) für Schäden aus der Verletzung des Lebens, des Körpers oder der Gesundheit,

b) für Schäden aus der nicht unerheblichen Verletzung einer wesentlichen Vertragspflicht (Verpflichtung, deren Erfüllung die ordnungsgemäße Durchführung des Vertrags überhaupt erst ermöglicht und auf deren Einhaltung der Vertragspartner regelmäßig vertraut und vertrauen darf); in diesem Fall ist die Haftung jedoch auf den Ersatz des vorhersehbaren, typischerweise eintretenden Schadens begrenzt.

Die vorgenannten Haftungsbeschränkungen gelten auch bei Pflichtverletzungen durch bzw. zugunsten von Personen, deren Verschulden WEISS nach gesetzlichen Vorschriften zu vertreten hat. Sie gelten nicht, soweit WEISS einen Mangel arglistig verschwiegen oder eine Beschaffenheitsgarantie übernommen hat und für Ansprüche des Kunden nach dem Produkthaftungsgesetz. Aussagen zur Beschaffenheit der Software sind als Leistungsbeschreibung zu verstehen und stellen keine Beschaffenheits- oder Haltbarkeitsgarantie im Sinne von § 443 BGB dar.

Bei Datenverlusten haftet WEISS nur für den Schaden, der auch bei ordnungsgemäßer Datensicherung durch den Kunden (Ziffer 4) entstanden wäre.

7. Haftung des Kunden und außerordentliche Kündigung
Der Kunde haftet gegenüber WEISS für alle Schäden, die WEISS aus der Verletzung der urheberrechtlichen Bestimmungen aus Ziffer 3 entstehen.

WEISS ist berechtigt, die dem Kunden eingeräumten Nutzungsrechte zu widerrufen, wenn der Kunde trotz Mahnung seitens WEISS wiederholt die nach Ziffer 3 eingeräumten Nutzungsrechte überschreitet oder keine dem Stand der Technik entsprechenden Vorkehrungen zur IT-Sicherheit im Sinne der Ziffer 4 trifft. In diesem Falle ist der Kunde verpflichtet, die Nutzung der Original-Software nebst sämtlichen Kopien unverzüglich einzustellen und diese zu vernichten. Der Kunde hat eine schriftliche Bestätigung der Vernichtung an die unten angegebene Adresse zu übersenden.

8. Rechtswahl und Gerichtsstand
Für alle Rechtsbeziehungen zwischen WEISS und dem Kunden, denen diese Bedingungen zu Grunde gelegt werden, gilt das Recht der Bundesrepublik Deutschland unter Ausschluss des Übereinkommens der Vereinten Nationen über Verträge über den internationalen Warenkauf (CISG).

Die Parteien sind sich darüber bewusst, dass die Software Export- und Importbeschränkungen unterliegen kann. Insbesondere können Genehmigungspflichten bestehen bzw. kann die Nutzung der Software oder damit verbundener Technologien im Ausland Beschränkungen unterliegen.

Der Kunde wird die anwendbaren Export- und Importkontrollvorschriften der Bundesrepublik Deutschland, der Europäischen Union und der Vereinigten Staaten von Amerika, sowie alle anderen einschlägigen Vorschriften einhalten. Die Vertragserfüllung des Lizenzgebers steht unter dem Vorbehalt, dass der Erfüllung keine Hindernisse aufgrund von nationalen und internationalen Vorschriften des Export- und Importrechts sowie keine sonstigen gesetzlichen Vorschriften entgegenstehen.

Sofern der Kunde Kaufmann, öffentlich-rechtliches Sondervermögen oder eine juristische Person des öffentlichen Rechts ist, ist ausschließlicher Gerichtsstand für alle sich aus den vorgenannten Rechtsbeziehungen ergebenden Ansprüche der Sitz von WEISS; erhebt WEISS Klage, so gilt daneben auch der allgemeine Gerichtsstand des Kunden.

Sprachen

Englisch

Download version
Beschreibung
Release Notes
Systemvorraussetzung
Lizenzbedingungen
Sprachen

More Downloads:

Weiss IoT Gateway 1.0 - Installations- und Bedienungsanleitung
 -

Weiss IoT Gateway 1.0 - Installations- und Bedienungsanleitung

Installations- und Bedienungsanleitung für Weiss IoT Gateway 1.0

다운로드

Weiss IoT Gateway 1.0 - Installations- und Bedienungsanleitung

Version

2019.02 63837042

날짜

File size

2.64 MB

Beschreibung

Installations- und Bedienungsanleitung für Weiss IoT Gateway 1.0

Vor der Installation:
► Vor der Installation der Software Weiss IoT Gateway die Anweisungen dieser Betriebsanleitung, der Betriebsanleitung für S!MPATI® 4.70 sowie die Kammer und deren Steuerung beachten.
► Als Betreiber eine entsprechende Betriebsanweisung anhand vorliegender Betriebsanleitung erstellen. Dabei die jeweiligen örtlichen und betrieblichen Verhältnisse und die Sprache des Bedienungspersonals berücksichtigen.

Download version
Beschreibung

More Downloads:

Weiss IoT Gateway 1.0
파일 수: 9 파일